What are the Features of Hormann-Flexon Speed-Commander™ 1400 Sel Cool-Master Best for Applications in Medical and Cooler Distribution Facilities in Baltimore, MD

A door is not just a door especially if we are talking about medical and cooler distribution facilities in Baltimore, MD.

This particular door should have the added attributes to help the facilities such as this to save energy to somehow uphold their overhead expenses to a manageable level. The medical and cooler distribution door should be assembled using a high-quality material with the special feature of the tight-closed attribute to control and regulate the temperature inside the distribution Center. With the assembly of the full perimeter draft seals, it smoothly manages the environmental control.

If you are in Baltimore, MD, it is strongly advised to get hold of the Hormann-Flexon Speed-Commander 1400 Sel Cool-Master Door because it is engineered to be utilized for the medical and cooler distribution application. It has a tight seal that prevents leaks and maintains the flexibility to keep the condensation to a minimum and high-speed door, which is fast operating that permits the continuous flow of traffic without jeopardizing the energy control and work efficiency.

The utilization of this equipment is simple and user-friendly because it accommodates the readily available standard power source. Moreover, an optional UPS emergency battery pack is likewise made available with doors that are equipped with the relevant control box.

Cool-Master has a built-in light grid for added safety and protection. It is built into the guide tracks that results in a completely free of coil cords, it is as if a thorough wall of protection has been set for personnel and equipment in the doorway. In fact, it also eliminates the requirement to reverse the edge of the panel, which results in the reduction of the conduct of scheduled maintenance and downtime.

If you are in dire need to get hold of this product, it is highly advised to avail of the products and services of Just-Rite Equipment, a division of DuraServ.

We have been known for offering high-quality and dependable products of different and popular commercial door manufacturers such as the Cornell/Cookson, Clopay, CHI, Wayne Dalton and Haas. In addition, we also offer an annual maintenance program to assist you in the provision or extension of your commercial door lifespan.

For repair services, we are always ready and available to serve our clients. As a matter of fact, we take phone call queries and consultation to possibly provide the utmost troubleshooting engagement. Just to mention, our emergency response team is prompt and experienced technicians.

For your needs about Hormann Flexon Speed Commander Sel Cool Master, high-performance doors, Hormann Flexon Speed Commander Sel Cool Master Baltimore MD, and high-performance doors  Baltimore MD, you may visit our official website to learn more about the complete details at http://bit.ly/justriteequip-Hormann-FlexonSpeed-Commander1400SelCool-Master.

For your other concerns, you may reach us through the following telephone numbers:

• Sterling, VA (703) 450-2800
• Baltimore, MD (410) 536-0505
• Jamesburg, NJ (609) 448-6550
• South Windsor, CT (860)528-1036

You may also contact us via email through our webpage at http://bit.ly/justriteequip-contact-us. Also, you may send your service request at http://bit.ly/justriteeqiup-servicerequest. 

To provide our beloved clients with the utmost services, our service centres at different service areas are regularly open to serve you better at:
• Sterling, VA
• Baltimore, MD
• Jamesburg, NJ
• Delaware
• Eastern Pennsylvania
• New Haven, CT
• Farmington, CT
• Windsor, CT
• Hartford, CT
• Fairfield, CT
• Springfield, MA

Call us now and we will discuss the complete details about your door project that suits your budget.

Why a Wayne Dalton - Thermospan 125 Insulated Sectional Door is Ideal for Applications That Require Higher Thermal Efficiency in Jamesburg, NJ

Industry owners, and commercial businesses owners often weigh the pros and cons if they need to install an insulated sectional door. Whatever the nature of the location, their business can utilize an insulated sectional door which is ideal for applications that require higher thermal efficiency because of the different advantages. 

What is an insulated sectional door?

An insulated sectional door is a thermal efficient door that provides protection against both hot and cold environments. One of these types is the Wayne Dalton-Thermospan 125 Insulated Sectional Door.

What is a thermal efficiency?

Thermal efficiency is the capacity of doors to be energy-efficient doors. It can be measured using the solar heat gain coefficient (SHGC) and U-factor for the door. 

Here are the reasons why this Thermospan Insulated Sectional Door is advantageous for applications that require higher thermal efficiency. 

1. Speed in door opening and closing. It takes 0.3 m/s for a sectional door to open and close compared to the 0.06-0.08 m/s for a traditional roller shutter door. This speed of Wayne Dalton Thermospan 125 Insulated Sectional Door Jamesburg NJ which is four times faster than those of traditional roller shutter doors has various benefits. 

A. Work efficiency improved. There will no wait time for workers or forklifts in front of the door as the speed in material handling increases by at least three times than the traditional roll up doors.

B. Cleanliness maintained. The increased speed in opening and closing the door allows a less amount of air and dust that enters the room. 

C. Temperature loss reduced. The quick opening and closing of the door reduces heat loss. 

2. Thermal insulation. The structure of the Thermospan Insulated Sectional Door Jamesburg NJ door panel is similar to a sandwich structure. The two surface layer has a 0.326 mm galvanized steel plate which is 40 mm-thick. A high density fire retardant polyurethane foam is in the middle with a 12-14 kg/m2 foam density. Heat conduction is avoided at the joint area through a special cold-bridge design. These commercial sectional doors can mostly be found in warehouses and in cold rooms because of its thermal insulation ration of 4.5 W/m*h.

3. Air tight doors. An EDPM weather seal rubber covers the door which is resistant to cold and chemicals. This allows the door to have a long lifespan and guarantees the door’s high air-tightness. This keeps the room clean as it prevents outside dust and air from entering the room. 

4. Cost-efficient doors. This Wayne Dalton Thermospan 125 Insulated Sectional Door has the ability to prevent energy transfers. It is also dependable and sturdy. 

If you need to install these commercial thermal doors, you can contact the following:

Sterling, VA (703) 450-2800

Baltimore, MD (410) 536-0505

Jamesburg, NJ (609) 448-6550

South Windsor, CT (860)528-1036

http://bit.ly/justriteequip-contact-us

http://bit.ly/justriteeqiup-servicerequest

Our Service Areas are:

Sterling, VA

Baltimore, MD

Jamesburg, NJ

Delaware

Eastern Pennsylvania

New Haven, CT

Farmington, CT

Windsor, CT

Hartford, CT

Fairfield, CT

Springfield, MA

What is a Dock Shelter and the Various Types?

It is important to consider the pros and cons of your business. But when it comes to transporting your goods from the warehouse to the trucks for delivery we always ensure that we have essential loading dock equipment that can increase efficiency to the whole process and make more safe and profitable.

Dock shelter seals off the gaps between the docked vehicles to the loading bay. It provides full access to the truck without exposing the product into the wind, extreme temperature and weather and pests that may cause unnecessary impact to the product being transported. Using this will ensure your energy savings, as it maintains the temperature inside the building, cleanliness and increases the speed of manpower through efficient transport of goods to the loading trucks.

A lot of companies offer loading dock shelters that can be useful, but each dock shelter has advantages and disadvantages that make it difficult to choose.

There are different types of dock shelters that Just-Rite Equipment, a division of DuraServ offers where you can choose from. They are listed as follows:

Serco S2200 Ultra Shelter

With its seal flexibility, and full trailer access of a shelter. It has a tight seal between the wall of the building and the back of the truck. Designed with impactable foams side members, in each side and head curtain/member is made with fiberglass and the translucent head member transmits light. 

Key Highlights

Shelter Head Frame: White Fiberglass(Translucent)

Channel Frame: Roll Formed/Galvanized Steel (2″ x 8″, 2″ x 10″ or 2″ x 12″)

Side Curtains with Foam Side Members/ Fiberglass Stays (Removable): Available

Standard Base Unit Projection: 18″ /Maximum Standard Unit Projection: 30″

Warranty: 5-years

Kelly Foam-Sided Shelter

Made with roll-formed galvanized steel framing, what is so special with this dock is that all pads are vented for air and moisture release. It also has full-length stripes that guide the driver to the docks. It also provides a seal from the external unnecessary entry like dust, insects and other airborne matter that may enter while the loading dock is in use. 

Key Highlights

Head Curtain: Five Fiberglass Stays/Four Overlapping Wear Pleats Per Side/Wind Straps

Side Curtains: Closed Cell Neoprene(Sealing Edge/Bottom Wear Panel)

Rain Sealing System Integration/Shelter Projections(Up to 30″): Available 

Foam Side Members:22 oz Vinyl Fabric

Shelter Head Frame: White Fiberglass(Translucent) 

Serco S-3200 Snap-back Dock Shelter

Serco S-3200 Shelter also known as Snap-back dock shelter.  This design is useful because it can be applied to wide vehicle variety and types. When trailers are misguided for some instance, its flexible frame, overlapping layers of fabric provide more resistance against sharp corners to prevent shelter damage. It also defies the side frame because it was covered with white 18 oz. coated vinyl as it projects natural light to the loading area. 

Key Highlights

Channel Frame: Roll Formed/Galvanized Steel: 2” x 4” Sides & 2” x 6”(Raked Top)

Base Unit Frame Projection(Standard): 24”

Steel Support Projection(Standard): 30”

Shelter Sides: Translucent White Vinyl/Shelter Top(Black Vinyl)

Side Curtains: Cell Neoprene(Closed)/Inside Sealing Edge/Bottom Wear Panel

Serco S-420 Rigid Frame Dock Shelter

When each of the above-mentioned designs has its own specification, the Serco S-420 Rigid Frame Dock Shelter is like the combined Ultra Shelter for its fiberglass material, has the visible stripes that guides the driver to docks like Kelly foam-sided Shelter and Serco S-3200 for its transmission of natural light to the loading dock. What defies this design is that the rain sealing system integration available on shelter with projections up to 30. The best pick for a design if you wish to combine more advantages in one.

Key Highlights

Standard: Base Unit Frame Projection: 24″ / Steel Support Projection: 30″

Rain Sealing System Integration (Shelter Projections Up to 30): Available 

Frames (Translucent White Fiberglass): Available

Increase “Standard” Unit Height by 6″: Available

Outside Edge of Face Curtains(Aluminum Trim Angles): Available

Kelly FLEX-FRAME Impactable Dock Shelter

Kelly FLEX-FRAME Impactable Dock Shelter design is also a combination of the above-mentioned design but is unique when it comes to the translucent white vinyl coating that is on the side and black vinyl coating is on the top cover. Which allows more lighting when you transport goods to the loading truck.

Key Highlights

Shelter Sides(Translucent White Vinyl)/ Shelter Top(Black Vinyl): Available

Base Unit Frame Projection (Standard): 24″

I-beam Protector Projection (Standard): 10″

Head Curtain: Five Fiberglass Stays/Four Overlapping Wear Pleats Per Side/Wind Straps

Side Curtains: Closed Cell Neoprene(Sealing Edge)/Bottom -Wear Panel

Kelley TS Rigid Frame Truck Shelter

While it has the common design with the other dock shelters, its highlight focuses on the head curtain that includes five Fiberglass Stays and four Overlapping Wear Pleats on the sides & Wind Straps that protects the goods when strong winds are present during the transfer process. Tapered Draft Pads (8” to 2”) located behind the side curtains help prevents airflow from lower corners of the shelter. Permanent “NO STEP” labels are included for safety.

Key Highlights

Standard: Base Unit Frame Projection- 24″/ Steel Support Projection- 30″

Rain Sealing System Integration(Shelter Projections Up to 30″): Available 

Head Curtain: Five Fiberglass Stays/Four Overlapping Wear Pleats Per Side/Wind Straps

Side Curtains: Closed Cell Neoprene(Sealing Edge)/ Bottom Wear Panel

Serco R620 Mechanical Rail Shelter

Its product protection extends from the loading dock up to the railway car transition. This dock shelter is suspended on a steel frame and equipped with extension arms that allow covering distances between docks and rail cars up to 72.

Key Highlights

Variable Height Head Curtain: Fixed/Split (up to 36″ drop standard)

Multiple cover fabric options: Available

Variety of Frame/Cover Configurations: Available

Just-Rite Equipment ensures you get the exact dock shelter you need when in dilemma on what to choose.  When you decide to invest on these docks, Good news! Because these loading docks are available near you!  

Contact us at Sterling, VA (703) 450-2800, Baltimore, MD (410) 536-0505, Jamesburg, NJ (609) 448-6550, and South Windsor, CT (860)528-1036, our Service Area Offices at dock shelter Sterling VA, 

dock shelter Baltimore MD, Jamesburg NJ dock shelter and South Windsor dock shelter would be happy to serve.

You can also contact us through our website at http://bit.ly/justriteequip-contact-us and make a Service Request at http://bit.ly/justriteeqiup-servicerequest, or you may visit us at Service Areas: Sterling, VA, Baltimore, MD, Jamesburg, NJ, Delaware, Eastern Pennsylvania, New Haven, CT, Farmington, CT, Windsor, CT, Hartford, CT, Fairfield, CT and Springfield, MA.

What are the Loading Dock Accessories and Their Uses for Dock Systems in Sterling, VA

A loading dock or specifically called loading bay is an area of a building or infrastructure wherein vehicles carrying goods and products are being loaded and unloaded. They are mostly found on commercial and industrial buildings, particularly warehouses. 

Loading docks can be in exterior, flush with the building envelope or it may be fully enclosed. They are part of a facility’s service or utility infrastructure, specifically giving a direct access to storage rooms, staging areas and freight elevators.

Maintenance of equipment for every warehouse is a necessity. At Just-Right Equipment, a division of DuraServ, will give purchasees some loading dock options for their loading dock accessories with their uses for them to choose. 

Below are the loading dock accessories and its uses: 

• APS Dock leveler T-Track PVC Weather Seal

The APS Dock leveler T-Seal Tracks can be welded either on the wall pit or on the dock leveler itself. The galvanized, welded, steel tracks must stay on place. There are various kits that are available together with the brush seal, PVC seal and different kinds of rear hinge seals. Uses of the APS Dock leveler T-Track PVC Weather is that is it impervious to heat and cold making sure for long lasting use. Its black brush standard has high visibility whether in yellow or black brush and its PVC has different widths. 

• APS Chain Sealer

This type of loading dock accessories keeps insects and rodents away from entering the facility through a chain opening of the dock leveler. The APS Chain sealer is easy to use and has a complete seal for your dock leveler. 

• APS Flexback Panel

The Flexback Panel is the solution to common lower door panel damage. This is one of the lower door damage that is encountered often by users and it can be costly when it comes to maintenance and it is a common problem in today’s busy warehouses and other establishments. The APS Flexback Panel is built with a high impact polymer skin and flexible tube frame which allows the panel to flex upon impact and return to its normal operating position. It is durable because it helps lessen door maintenance and helps diminish damage to bottom door panels. The Flex back uses standard door hardware and replaces most standard sectional door panels easily. The insulated panel also provides an exceptional thermal seal to save on energy costs. 

• APS Z-Track Guard

This is a loading dock accessory in which it is a very cost effective solution for the protection of your overhead door tracks from repairs that can be very expensive. It has a Z-guard layered-wrap of steel around the door track and mounts easily to the adjacent wall. It also keeps your floor space free from obstructions around the door opening and does not interfere with security wiring around any door opening. The low-profile design protects the door track without interference to the door operation. 

We can quickly service any part of the Mid-Atlantic region like our convenient service areas in Baltimore, Jamesburg, Sterling, Delaware, Eastern Pennsylvania, New Haven, Farmington and Windsor, Hartford, Fairfield and Springfield. We are a team with trusted, fully-trained technicians to attend to your needs anywhere in the Mid-Atlantic region. As part of the DuraServ family, we work closely with the National teams on major retail accounts. And we believe with our mission “to be the most trusted sales and service distributor in our market”. You can contact us today if you have questions with retails and maintenance of your commercial doors and  loading dock options in Sterling. You can reach through our service areas phone numbers: Sterling (703) 450-2800 | Baltimore (410) 536-0505 | Jamesburg (609) 448-6550 | South Windsor (860) 528-1036 or you may contact us through http://bit.ly/justriteequip-contact-us or http://bit.ly/justriteeqiup-servicerequest.